DIY Systainer Bins

  • Organize parts in DIY Systainer
  • Keep parts steady in place due to close fit
  • Subdivide bins in yet smaller compartments
  • Provide tabs for identification of contents

The STL pack offered here contains 3d-printable components to print your own DIY Systainer Bins.

$10.00

Why

This project was created to make DIY Systainer box more useful. By itself, the box works fine for tools, and larger things, but not for smaller parts like hobby motors or electronic components. The bins help to organize such parts better.

Details

  • Bin sizes are a multiple of 2” (50.8mm). Base bin is 2” (width) x 2” (length) x 2” (height)
  • They can be stacked. Two stacked 2” bins fit into DIY Systainer; its lid holds them in place
  • Bins can be placed on a grid to prevent them from shifting. Glue grids together to create larger area

Bins & Grids

The following bins and grids are included in STL pack:

Name Length in. Width in. Height in. N
bin_2x2x2_x1 2 2 2 1
bin_2x2x2_x2 2 2 2 2
bin_2x2x2_x3 2 2 2 3
bin_2x2x2_x4 2 2 2 4
bin_2x2x4_x1 2 2 4 1
bin_4x2x2_x1 4 2 2 1
bin_4x2x2_x3 4 2 2 3
bin_4x2x4_x1 4 2 4 1
bin_4x4x2_x1 4 4 2 1
bin_4x4x4_x1 4 4 4 1
grid_2x4 2 4   2
grid_2x6 2 6   3
grid_4x4 4 4   4
grid_4x6 4 6   6
grid_6x6 6 6   9

N = Compartments

STL Models

  • bin_2x2x2_x1

  • bin_2x2x2_x2

  • bin_2x2x2_x3

  • bin_2x2x2_x4

  • bin_2x2x4_x1

  • bin_4x2x2_x1

  • bin_4x2x2_x3

  • bin_4x2x4_x1

  • bin_4x4x2_x1

  • bin_4x4x4_x1

  • grid_2x4

  • grid_2x6

  • grid_4x4

  • grid_4x6

  • grid_6x6

3D Printer Settings

Good prints were produced on Prusa MINI with:

  • 0.6 mm nozzle
  • 0.3 mm QUALITY
  • 15% infill
  • 4 perimeters
  • PLA